浏览器自带分享功能也很好用哦~The main products are block ice machine, flake ice machine, tube ice machine, particle ice machine, plate ice machine, chiller, concrete cooling system, automatic ice storage and delivery system, dynamic ice storage system.
Xurui ice machine enjoys better and faster cooling effect. The ice making process is as follows:
Refrigeration cycle: The refrigerant enters the interlayer of the evaporative plate from the refrigeration system for evaporation and refrigeration, exchanges heat with the water or ice layer on the surface of the evaporative plate, absorbs heat and evaporates into a gaseous state, and is then inhaled, compressed, condensed and throttled by the refrigeration unit. Re-enter the evaporative plate evaporative refrigeration to complete the refrigeration cycle.
Ice-making cycle: water enters the water distributor on the upper part of the evaporation plate module from the water storage tank under the action of the circulating water pump, and flows down evenly in a film shape along the surface of the falling film evaporation plate through the uniform distribution of the water distributor, and is cooled by the cooling device inside the evaporation plate. The agent quickly freezes into plate ice. The water that has not been frozen into ice flows back to the water storage tank, and is pumped out again by the water pump into the water distributor on the upper part of the evaporation plate module to complete the ice making cycle.
Ice melting cycle: When the ice layer is gradually frozen to a certain thickness on the evaporator, the high-temperature exhaust gas is guided by the host module into the interlayer of the falling film evaporation plate, the temperature in the evaporation module rises, and the ice in contact with the surface of the evaporation plate is lost due to heat. At the same time, the water sprayed along the surface of the evaporation plate forms a water film between the ice layer and the evaporation plate, and the ice layer slides down to the ice storage tank at the lower part of the evaporation plate by gravity, breaking into smaller flake ice. The ice prepared by the above process can be directly used for rapid cooling (such as for ocean fishing, seafood processing, concrete engineering cooling), or it can be used to melt ice to provide cold water (such as used in air conditioning systems, cold water in the food industry) .
Features of Flake Ice Maker
★Ultra-low temperature energy consumption design The materials of Xurui ice machine accessories have undergone strict professional selection. The stainless steel material adopts advanced processing equipment and heat treatment to ensure the best heat transfer efficiency; the high thermal conductivity evaporator adopts the alloy material with the best conductivity coefficient in the industry, and through surface treatment and fine welding, the evaporator presents the best strength and hardness , cooling effect, so as to achieve the stability and efficiency of the ice-making system; high-efficiency, energy-saving and environmentally friendly heat exchangers have good anti-corrosion performance, adapt to new refrigerants, and meet the national requirements for energy conservation, environmental protection, and low-carbon economy.
★The one-time forming ice blade is strong and stable: the non-welded stainless steel ice blade is cut and formed in one time, and the ice is rotated and scraped for a long time, and it is still strong and tough, and the scraped ice is uniform and almost free of powder.
★Outstanding high-quality ice flakes: thin ice, dry and smooth ice flakes, environmental protection and hygiene, moderate hardness, will not damage the refrigerated products, and ensure the original flavor of the refrigerated products. It can be directly used to stir and mix the object to be cooled, and can also be evenly attached to the surface of the object to be cooled; large contact area and fast cooling speed can ensure uniform temperature of all parts of the object to be cooled; easy to crush and strong plasticity
★Fully automatic control: The overall and modular equipment is convenient for on-site installation and maintenance; the photoelectric switch is directly installed at the bottom of the evaporator, and there is no need to install it in the refrigerator; the operator only needs to press the switch to operate. Automatically shut down when full of ice, and automatically make ice when ice is needed. No need for special care, saving time and effort.
★Stable operation: Strictly control the details, the welding and design of the ice machine pipeline make the refrigerant play the maximum effect; the large-area water receiving tray design prevents dripping water at the bottom of the evaporator; the direct liquid supply, dry evaporation, the control is simple, safe and reliable; The protection system of the ice maker greatly reduces the failure of the equipment and reduces the maintenance cost of the entire system. Through the matching and compatibility with the equipment, the performance and cost can be optimally combined to maximize the value for you.
The main products are block ice machine, flake ice machine, tube ice machine, particle ice machine, plate ice machine, chiller, concrete cooling system, automatic ice storage Ice delivery system, dynamic ice storage system.
The main products are block ice machine, flake ice machine, tube ice machine, particle ice machine, plate ice machine, chiller, concrete cooling system, automatic ice storage and delivery system, dynamic ice storage system.
Xurui ice machine enjoys better and faster cooling effect. The ice making process is as follows:
Refrigeration cycle: The refrigerant enters the interlayer of the evaporative plate from the refrigeration system for evaporation and refrigeration, exchanges heat with the water or ice layer on the surface of the evaporative plate, absorbs heat and evaporates into a gaseous state, and is then inhaled, compressed, condensed and throttled by the refrigeration unit. Re-enter the evaporative plate evaporative refrigeration to complete the refrigeration cycle.
Ice-making cycle: water enters the water distributor on the upper part of the evaporation plate module from the water storage tank under the action of the circulating water pump, and flows down evenly in a film shape along the surface of the falling film evaporation plate through the uniform distribution of the water distributor, and is cooled by the cooling device inside the evaporation plate. The agent quickly freezes into plate ice. The water that has not been frozen into ice flows back to the water storage tank, and is pumped out again by the water pump into the water distributor on the upper part of the evaporation plate module to complete the ice making cycle.
Ice melting cycle: When the ice layer is gradually frozen to a certain thickness on the evaporator, the high-temperature exhaust gas is guided by the host module into the interlayer of the falling film evaporation plate, the temperature in the evaporation module rises, and the ice in contact with the surface of the evaporation plate is lost due to heat. At the same time, the water sprayed along the surface of the evaporation plate forms a water film between the ice layer and the evaporation plate, and the ice layer slides down to the ice storage tank at the lower part of the evaporation plate by gravity, breaking into smaller flake ice. The ice prepared by the above process can be directly used for rapid cooling (such as for ocean fishing, seafood processing, concrete engineering cooling), or it can be used to melt ice to provide cold water (such as used in air conditioning systems, cold water in the food industry) .
Features of Flake Ice Maker
★Ultra-low temperature energy consumption design The materials of Xurui ice machine accessories have undergone strict professional selection. The stainless steel material adopts advanced processing equipment and heat treatment to ensure the best heat transfer efficiency; the high thermal conductivity evaporator adopts the alloy material with the best conductivity coefficient in the industry, and through surface treatment and fine welding, the evaporator presents the best strength and hardness , cooling effect, so as to achieve the stability and efficiency of the ice-making system; high-efficiency, energy-saving and environmentally friendly heat exchangers have good anti-corrosion performance, adapt to new refrigerants, and meet the national requirements for energy conservation, environmental protection, and low-carbon economy.
★The one-time forming ice blade is strong and stable: the non-welded stainless steel ice blade is cut and formed in one time, and the ice is rotated and scraped for a long time, and it is still strong and tough, and the scraped ice is uniform and almost free of powder.
★Outstanding high-quality ice flakes: thin ice, dry and smooth ice flakes, environmental protection and hygiene, moderate hardness, will not damage the refrigerated products, and ensure the original flavor of the refrigerated products. It can be directly used to stir and mix the object to be cooled, and can also be evenly attached to the surface of the object to be cooled; large contact area and fast cooling speed can ensure uniform temperature of all parts of the object to be cooled; easy to crush and strong plasticity
★Fully automatic control: The overall and modular equipment is convenient for on-site installation and maintenance; the photoelectric switch is directly installed at the bottom of the evaporator, and there is no need to install it in the refrigerator; the operator only needs to press the switch to operate. Automatically shut down when full of ice, and automatically make ice when ice is needed. No need for special care, saving time and effort.
★Stable operation: Strictly control the details, the welding and design of the ice machine pipeline make the refrigerant play the maximum effect; the large-area water receiving tray design prevents dripping water at the bottom of the evaporator; the direct liquid supply, dry evaporation, the control is simple, safe and reliable; The protection system of the ice maker greatly reduces the failure of the equipment and reduces the maintenance cost of the entire system. Through the matching and compatibility with the equipment, the performance and cost can be optimally combined to maximize the value for you.
The main products are block ice machine, flake ice machine, tube ice machine, particle ice machine, plate ice machine, chiller, concrete cooling system, automatic ice storage Ice delivery system, dynamic ice storage system.
